ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 506)

Chapter 31 Internet Access
ZyWALL 2WG User’s Guide
506
Figure 297 Internet Access Setup (PPTP)
The following table contains instructions about the new fields when you choose PPTP in the
Encapsulation field in menu 4.
31.4 Configuring the PPPoE Client
If you enable PPPoE in menu 4, you will see the next screen.
Menu 4 - Internet Access Setup
ISP's Name= WAN_1
Encapsulation= PPTP
Service Type= N/A
My Login=
My Password= ********
Retype to Confirm= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Table 207 New Fields in Menu 4 (PPTP) Screen
FIELD DESCRIPTION
Encapsulation Press [SPACE BAR] and then press [ENTER] to choose PPTP. The encapsulation
method influences your choices for the IP Address field.
Idle Timeout This value specifies the time, in seconds, that elapses before the ZyWALL
automatically disconnects from the PPTP server.