ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 280)

Chapter 14 IPSec VPN
ZyWALL 2WG User’s Guide
280
Figure 153 SECURITY > VPN > VPN Rules (IKE) > Move Network Policy
The following table describes the labels in this screen.
14.9 Dialing the VPN Tunnel via Web Configurator
To test whether the IPSec routers can build the VPN tunnel, click the dial ( ) icon in the
VPN Rules (IKE) screen to have the IPSec routers set up the tunnel. If you find a disconnect
(
) icon next to the rule you just created in the VPN Rules (IKE) screen, the ZyWALL
automatically built the VPN tunnel. Go to the SA Monitor screen to view a list of connected
VPN tunnels. See
Section 14.15 on page 289 for more information.
Table 86 SECURITY > VPN > VPN Rules (IKE) > Move Network Policy
LABEL DESCRIPTION
Network Policy
Information
The following fields display the general network settings of this VPN policy.
Name This field displays the policy name.
Local Network This field displays one or a range of IP address(es) of the computer(s) behind the
ZyWALL.
Remote Network This field displays one or a range of IP address(es) of the remote network behind
the remote IPsec router.
Gateway Policy
Information
Gateway Policy Select the name of a VPN rule (or gateway policy) to which you want to associate
this VPN network policy.
If you do not want to associate a network policy to any gateway policy, select
Recycle Bin from the drop-down list box. The Recycle Bin gateway policy is a
virtual placeholder for any network policy(ies) without an associated gateway
policy. When there is a network policy in Recycle Bin, the Recycle Bin gateway
policy automatically displays in the VPN Rules (IKE) screen.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard all changes and return to the main VPN screen.