Figure 253 logs > reports: protocol/port example, Table 156 logs > reports: protocol/ port – ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 433
Chapter 25 Logs Screens
ZyWALL 2WG User’s Guide
433
Figure 253 LOGS > Reports: Protocol/Port Example
The following table describes the labels in this screen.
Table 156 LOGS > Reports: Protocol/ Port
LABEL
DESCRIPTION
Protocol/Port
This column lists the protocols or service ports for which the most traffic has gone
through the ZyWALL. The protocols or service ports are listed in descending order with
the most used protocol or service port listed first.
Direction
This field displays Incoming to denote traffic that is coming in from the WAN to the
LAN, DMZ or WLAN. This field displays Outgoing to denote traffic that is going out
from the LAN, DMZ or WLAN to the WAN.
Amount
This column lists how much traffic has been sent and/or received for each protocol or
service port. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies
with the amount of traffic for the particular protocol or service port. The count starts
over at 0 if a protocol or port passes the bytes count limit (see