beautypg.com

2 pppoe encapsulation – ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Page 523

background image

Chapter 35 Remote Node Setup

ZyWALL 2WG User’s Guide

523

35.3.2 PPPoE Encapsulation

The ZyWALL supports PPPoE (Point-to-Point Protocol over Ethernet). You can only use
PPPoE encapsulation when you’re using the ZyWALL with a DSL modem as the WAN
device. If you change the Encapsulation to PPPoE, then you will see the next screen.

Figure 313 Menu 11.1: Remote Node Profile for PPPoE Encapsulation

Server

This field is valid only when RoadRunner is selected in the Service Type field. The

ZyWALL will find the RoadRunner Server IP automatically if this field is left blank. If

it does not, then you must enter the authentication server IP address here.

Relogin Every

(min)

This field is available when you select Telia Login in the Service Type field.
The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.

Type the number of minutes from 1 to 59 (30 recommended) for the ZyWALL to wait

between logins.

Route

This field refers to the protocol that will be routed by your ZyWALL – IP is the only

option for the ZyWALL.

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes and press

[ENTER] to go to Menu 11.1.2 - Remote Node Network Layer Options.

Session Options

Schedules

You can apply up to four schedule sets here. For more details please refer to

Chapter 46 on page 619

.

Edit Filter Sets

This field leads to another “hidden” menu. Use [SPACE BAR] to select Yes and

press [ENTER] to open menu 11.1.4 to edit the filter sets. See

Section 35.5 on page

527

for more details.

Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to

save your configuration, or press [ESC] at any time to cancel.

Table 212 Menu 11.1: Remote Node Profile for Ethernet Encapsulation (continued)

FIELD

DESCRIPTION

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe Route= IP
Active= Yes

Encapsulation= PPPoE Edit IP= No
Service Type= Standard Telco Option:
Service Name= Allocated Budget(min)= 0
Outgoing: Period(hr)= 0
My Login= Schedules=
My Password= ******** Nailed-Up Connection= No
Retype to Confirm= ********
Authen= CHAP/PAP
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100


Press ENTER to Confirm or ESC to Cancel: