ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 66)

Chapter 2 Introducing the Web Configurator
ZyWALL 2WG User’s Guide
66
Table Key: An O in a mode’s column shows that the device mode has the specified feature.
The information in this table was correct at the time of writing, although it may be subject to
change.
The following table describes the sub-menus.
VPN O O
Certificates O O
Authentication Server O O
NAT O
Static Route O
Policy Route O
Bandwidth Management O O
DNS O
Remote Management O O
UPnP O
ALG O O
Logs O O
Maintenance O O
Table 6 Screens Summary
LINK TAB FUNCTION
HOME This screen shows the ZyWALL’s general device and network
status information. Use this screen to access the wizards,
statistics and DHCP table.
REGISTRATIO
N
Registration Use this screen to register your ZyWALL and activate the trial
service subscriptions.
Service Use this to manage and update the service status and license
information.
NETWORK
LAN LAN Use this screen to configure LAN DHCP and TCP/IP settings.
Static DHCP Use this screen to assign fixed IP addresses on the LAN.
IP Alias Use this screen to partition your LAN interface into subnets.
Port Roles Use this screen to change the LAN/DMZ/WLAN port roles.
BRIDGE Bridge Use this screen to change the bridge settings on the ZyWALL.
Port Roles Use this screen to change the LAN/DMZ/WLAN port roles on the
ZyWALL.
Table 5 Bridge and Router Mode Features Comparison
FEATURE BRIDGE MODE ROUTER MODE