ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 140)

Chapter 8 WAN Screens
ZyWALL 2WG User’s Guide
140
8.7.2 Weighted Round Robin
To load balance using the weighted round robin method, select Weighted Round Robin in the
Load Balancing Algorithm field.
Figure 65 Load Balancing: Weighted Round Robin
The following table describes the related fields in this screen.
8.7.3 Spillover
To load balance using the spillover method, select Spillover in the Load Balancing
Algorithm field.
Interface This field displays the name of the WAN interface (WAN 1 and WAN 2).
Available
Inbound
Bandwidth
This field is applicable when you select Outbound + Inbound or Inbound Only in
the Load Balancing Index(es) field.
Specify the inbound (or downstream) bandwidth (in kilo bites per second) for the
interface. This should be the actual downstream bandwidth that your ISP provides.
Available
Outbound
Bandwidth
This field is applicable when you select Outbound + Inbound or Outbound Only in
the Load Balancing Index(es) field.
Specify the outbound (or upstream) bandwidth (in kilo bites per second) for the
interface. This should be the actual upstream bandwidth that your ISP provides.
Table 34 Load Balancing: Least Load First (continued)
LABEL DESCRIPTION
Table 35 Load Balancing: Weighted Round Robin
LABEL DESCRIPTION
Active/Active
Mode
Select Active/Active Mode and set the related fields to enable load balancing on the
ZyWALL.
Load Balancing
Algorithm
Set the load balancing method to Weighted Round Robin.
Interface This field displays the name of the WAN interface (WAN 1 and WAN 2).
Ratio Specify the weight for the interface. Enter 0 to set the ZyWALL not to send traffic load
to the interface. The higher the number, the bigger the weight (the more traffic sent).