ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 54)

Chapter 1 Getting to Know Your ZyWALL
ZyWALL 2WG User’s Guide
54
1.4.4 Front Panel Lights
Figure 4 Front Panel
The following table describes the lights.
Table 1 Front Panel Lights
LED COLOR STATUS DESCRIPTION
PWR Off The ZyWALL is turned off.
Green On The ZyWALL is ready and running.
Flashing The ZyWALL is restarting.
Red On The power to the ZyWALL is too low.
LAN/DMZ 10/
100
Off The LAN/DMZ is not connected.
Green On The ZyWALL has a successful 10Mbps Ethernet connection.
Flashing The 10M LAN is sending or receiving packets.
Orange On The ZyWALL has a successful 100Mbps Ethernet
connection.
Flashing The 100M LAN is sending or receiving packets.
WAN Off The WAN connection is not ready, or has failed.
Green On The ZyWALL has a successful 10Mbps WAN connection.
Flashing The 10M WAN is sending or receiving packets.
Orange On The ZyWALL has a successful 100Mbps WAN connection.
Flashing The 100M WAN is sending or receiving packets.
AUX Green Off The backup port is not connected.
On The backup port is connected.
Flashing The backup port is sending or receiving packets.
WLAN Green Off The wireless LAN is not ready, or has failed.
On The wireless LAN is ready.
Flashing The wireless LAN is sending or receiving packets.
CARD Off There is no 3G card inserted in the ZyWALL.
Green On A 3G card is inserted and detected by the ZyWALL.
Orange On The 3G WAN connection is ready.
Flashing The 3G WAN is sending or receiving packets.