ZyXEL Communications G-2000 Plus - Manual (Page 68)

ZyAIR G-2000 Plus User’s Guide
67 Chapter 4 System Screens
4.5 Configuring Password
To change your ZyAIR’s password (recommended), click the SYSTEM link under
ADVANCED and then the Password tab. The screen appears as shown. This screen allows
you to change the ZyAIR’s password.
If you forget your password (or the ZyAIR IP address), you will need to reset the ZyAIR. See
the Resetting the ZyAIR section for details
Figure 16 Password.
The following table describes the labels in this screen.
Table 15 Password
LABEL DESCRIPTIONS
Old Password Type in your existing system password (1234 is the default password).
New Password Type your new system password (up to 31 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Retype your new system password for confirmation.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to reload the previous configuration for this screen.
Use WAN IP address Select this option to update the IP address of the host name(s) automatically
by the DDNS server. It is recommended that you select this option.
DDNS server auto
detect IP Address
Select this option to update the IP address of the host name(s) automatically
by the DDNS server. It is recommended that you select this option.
Use specified IP
Address
Select this option to update the IP address of the host name(s) to the IP
address specified below. Use this option if you have a static IP address.
IP Address Enter the IP address if you select the Use specified IP Address option.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.
Table 14 DDNS
LABEL DESCRIPTION