ZyXEL Communications G-2000 Plus - Manual (Page 159)

ZyAIR G-2000 Plus User’s Guide
Chapter 12 Remote Management Screens 158
Figure 65 Remote Management: WWW
The following table describes the labels in this screen.
Table 50 Remote Management: WWW
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyAIR using this
service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyAIR using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyAIR using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
12.3 Configuring Telnet
You can configure your ZyAIR for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the ZyAIR.