ZyXEL Communications G-2000 Plus - Manual (Page 379)

ZyAIR G-2000 Plus User’s Guide
Appendix B 378
Appendix B
Brute-Force Password Guessing
Protection
The following describes the commands for enabling, disabling and configuring the brute-force
password guessing protection mechanism for the password. See
Appendix F for information
on the command structure.
Table 132 Brute-Force Password Guessing Protection Commands
COMMAND DESCRIPTION
sys pwderrtm This command displays the brute-force guessing password protection settings.
sys pwderrtm 0 This command turns off the password’s protection from brute-force guessing. The
brute-force password guessing protection is turned off by default.
sys pwderrtm N This command sets the password protection to block all access attempts for N (a
number from 1 to 60) minutes after the third time an incorrect password is entered.
Example
sys pwderrtm 5
This command sets the password protection to block all access attempts for five minutes after
the third time an incorrect password is entered.