ZyXEL Communications G-2000 Plus - Manual (Page 295)

ZyAIR G-2000 Plus User’s Guide
Chapter 28 Network Address Translation (NAT) 294
C
H A P T E R
28
Network Address Translation
(NAT)
This chapter discusses how to configure NAT on the ZyAIR.
28.1 Using NAT
Note: You must create a firewall rule in addition to setting up
SUA/NAT, to allow traffic from the WAN to be forwarded
through the ZyAIR
28.1.1 SUA (Single User Account) Versus NAT
SUA (Single User Account) is a ZyNOS implementation of a subset of NAT that supports two
types of mapping, Many-to-One and Server. See section Address Mapping Sets for a
detailed description of the NAT set for SUA. The ZyAIR also supports Full Feature NAT to
map multiple global IP addresses to multiple private LAN IP addresses of clients or servers
using mapping types.
Note: Choose SUA Only if you have just one public WAN IP
address for your ZyAIR.
Note: Choose Full Feature if you have multiple public WAN IP
addresses for your ZyAIR.
28.2 Applying NAT
You apply NAT via menus 4 or 11.3 as displayed next. The next figure shows you how to
apply NAT for Internet access in menu 4. Enter 4 from the main menu to go to Menu 4 -
Internet Access Setup.