ZyXEL Communications G-2000 Plus - Manual (Page 146)

ZyAIR G-2000 Plus User’s Guide
145 Chapter 10 Single User Account (SUA) / Network Address Translation (NAT)
10.5 Configuring Address Mapping
Ordering your rules is important because the ZyAIR applies the rules in the order that you
specify. When a rule matches the current packet, the ZyAIR takes the corresponding action
and the remaining rules are ignored. If there are any empty rules before your new configured
rule, your configured rule will be pushed up by that number of empty rules. For example, if
you have already configured rules 1 to 6 in your current set and now you configure rule
number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if you delete rule
4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new rules 4, 5 and 6.
To change your ZyAIR’s Address Mapping settings, click SUA/NAT, then the Address
Mapping tab. The screen appears as shown.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.
Table 44 SUA/NAT Setup
LABEL DESCRIPTION