ZyXEL Communications G-2000 Plus - Manual (Page 166)

ZyAIR G-2000 Plus User’s Guide
165 Chapter 12 Remote Management Screens
12.7 Configuring DNS
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on Wizard Setup for background information.
To change your ZyAIR’s DNS settings, click REMOTE MGMT, then the DNS tab. The
screen appears as shown.
Figure 71 Remote Management: DNS
The following table describes the labels in this screen.
Service Access Select the interface(s) through which a computer may access the ZyAIR using
this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyAIR using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyAIR using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 54 Remote Management: SNMP
LABEL DESCRIPTION
Table 55 Remote Management: DNS
LABEL DESCRIPTION
Server Port The DNS service port number is 53 and cannot be changed here.
Server Access Select the interface(s) through which a computer may send DNS queries to the
ZyAIR.