ZyXEL Communications G-2000 Plus - Manual (Page 265)

ZyAIR G-2000 Plus User’s Guide
Chapter 23 LAN Setup 264
C
H A P T E R
23
LAN Setup
This chapter shows you how to configure wired Local Area Network (LAN) settings on your
ZyAIR.
.
23.1 LAN Setup
This section describes how to configure the Ethernet using Menu 3 – LAN Setup. From the
main menu, enter 3 to display menu 3.
Figure 125 Menu 3 LAN Setup
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
5. Wireless LAN Setup
23.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You
seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain
packets, reduce traffic and prevent security breaches
Figure 126 Menu 3.1 LAN Port Filter Setup.
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
If you need to define filters, please read the Filter Set Configuration chapter first, then return
to this menu to define the filter sets.