ZyXEL Communications G-2000 Plus - Manual (Page 304)

ZyAIR G-2000 Plus User’s Guide
303 Chapter 28 Network Address Translation (NAT)
Figure 155 NAT Example 1
Figure 156
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Press ENTER to Confirm or ESC to Cancel:
Menu 4 Internet Access & NAT Example
From menu 4, choose the SUA Only option from the Network Address Translation field.
This is the Many-to-One mapping discussed in section General NAT Examples. The SUA
Only read-only option from the Network Address Translation field in menus 4 and 11.3 is
specifically pre-configured to handle this case.
28.5.2 Example 2: Internet Access with an Inside Server
The dynamic Inside Global Address is assigned by the ISP.