ZyXEL Communications G-2000 Plus - Manual (Page 158)

ZyAIR G-2000 Plus User’s Guide
157 Chapter 12 Remote Management Screens
1 A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet,
FTP or Web service.
2 You have disabled that service in one of the remote management screens.
3 The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the ZyAIR will disconnect the session immediately.
4 There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
5 There is a firewall rule that blocks it.
12.1.2 Remote Management and NAT
When NAT is enabled:
• Use the ZyAIR’s WAN IP address when configuring from the WAN.
• Use the ZyAIR’s LAN IP address when configuring from the LAN.
12.1.3 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyAIR automatically logs you out if the management session remains idle for longer than
this timeout period. The management session does not time out when a statistics screen is
polling. You can change the timeout period in the System screen
12.2 Configuring WWW
To change your ZyAIR’s World Wide Web settings, click REMOTE MGMT to display the
WWW screen.