ZyXEL Communications G-2000 Plus - Manual (Page 67)

ZyAIR G-2000 Plus User’s Guide
Chapter 4 System Screens 66
4.4 Configuring Dynamic DNS
To change your ZyAIR’s DDNS, click SYSTEM, then the DDNS tab. The screen appears as
shown.
Figure 15 DDNS
The following table describes the labels in this screen.
Table 14 DDNS
LABEL DESCRIPTION
Enable DDNS Select this check box to use dynamic DNS.
Service Provider Select the name of your Dynamic DNS service provider.
DDNS Type Select the type of service that you are registered for from your Dynamic DNS
service provider.
Host Names 1~3 Enter the host names in the three fields provided. You can specify up to two
host names in each field separated by a comma (",").
User Name Enter your user name.
Password Enter the password assigned to you.
Enable Wildcard Option Select the check box to enable DynDNS Wildcard.
Enable off line option This option is available when CustomDNS is selected in the DDNS Type
field. Check with your Dynamic DNS service provider to have traffic
redirected to a URL (that you can specify) while you are off line.
IP Address Update Policy: