ZyXEL Communications G-2000 Plus - Manual (Page 157)

ZyAIR G-2000 Plus User’s Guide
Chapter 12 Remote Management Screens 156
C
H A P T E R
12
Remote Management Screens
This chapter provides information on the Remote Management screens.
12.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyAIR interface (if any) from which computers.
Note: When you configure remote management to allow
management from the WAN, you still need to configure a
firewall rule to allow access. See the firewall chapters for details
on configuring firewall rules
You may manage your ZyAIR from a remote location via:
• Internet (WAN only) • ALL (LAN and WAN)
• LAN only • Neither (Disable).
Note: When you Choose WAN only or ALL (LAN & WAN), you
still need to configure a firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyAIR
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Console port
2 Telnet
3 HTTP
12.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when: