ZyXEL Communications G-2000 Plus - Manual (Page 61)

ZyAIR G-2000 Plus User’s Guide
Chapter 3 Wizard Setup 60
You can configure the WAN port's MAC address by either using the factory default or cloning
the MAC address from a computer on your LAN. Once it is successfully configured, the
address will be copied to the "rom" file (ZyNOS configuration file). It will not change unless
you change the setting or upload a different "rom" file.
Note: ZyXEL recommends you clone the MAC address from a
computer on your LAN even if your ISP does not require MAC
address authentication.
Table 11 Example of Network Properties for LAN Servers with Fixed IP Addresses
Choose an IP address 192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.
Subnet mask 255.255.255.0
Gateway (or default route) 192.168.1.1(ZyAIR LAN IP)
The fifth wizard screen varies according to the type of encapsulation that you select in the
third wizard screen.