ZyXEL Communications G-2000 Plus - Manual (Page 363)

ZyAIR G-2000 Plus User’s Guide
Chapter 35 System Maintenance and Information 362
C
H A P T E R
35
System Maintenance and
Information
This chapter leads you through SMT menus 24.8 and 24.10.
35.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 –
System Maintenance. A list of valid commands can be found by typing help or ? at the
command prompt. Type “exit” to return to the SMT main menu when finished.