Xerox 50 - Manual (Page 95)

DOCUMENT CENTRE CS 50 USER GUIDE 4–23 BASIC COPYING
1
2
3
5
6
7
4
3 Perform one of the following to select paper size:
•
Touch Auto Paper Size as shown in Figure 27.
•
Touch International sizes and select one of
the preset international sizes, such as A3 or
A4, as shown in Figure 28.
KEY POINT: You must select International
sizes to access the Postcard size option.
•
Touch Inch Sizes and select one of the
standard US sizes, such as 8.5 x 11 or 11 x
17 inches, as shown in Figure 29.
•
Touch Non Standard Sizes and enter the X
(width) and Y (length) dimensions by using
the arrows, as shown in Figure 30.
Touch the left or right arrows to decrease or
increase the X (width) dimensions. Touch the
down or up arrows to decrease or increase
the Y (length) dimensions.
4 Touch the appropriate Paper Type.
5 Touch Save to return to the Paper Supply screen.
6 Touch Save to return to the Basic Copying tab.
Figure 27: Tray 5 Auto Paper Sizes
Figure 28: Tray 5 International Paper Sizes
Figure 29: Tray 5 Inch Sizes
Figure 30: Tray 5 Non Standard Sizes