Xerox 50 - Manual (Page 116)

ADDED FEATURES 5–20 DOCUMENT CENTRE CS 50 USER GUIDE
2
3
4
5
6
7
5
Corner Shift
Select the Corner Shift feature to move the image
to a specified edge or corner on the output copy
for Side 1 or 2, as illustrated in Figure 21.
This feature works in three ways:
•
To shift an image on small documents to a
specified corner on the output
•
To be used with the Reduction feature to
designate a position where the reduced image
is to appear on the output
•
To be used with the Enlarge feature to
designate a position where the enlarged
image is to appear on the output
NOTE: Corner Shift may not be evident on your
output if you copy your original document at
100%.
The orientation of the image on the copies is
determined by the placement of the document on
the Document Glass and by the orientation of the
selected paper supply.
The copier/printer completes a prescan to
determine the size of the document.
Figure 21: Example of Corner Shift