Xerox 50 - Manual (Page 189)

DOCUMENT CENTRE CS 50 USER GUIDE 9–3 PAPER
1
3
4
5
6
7
9
Paper Tray 5
Paper Tray 5 (sometimes called the Bypass Tray
or the Multiple Sheet Inserter) is located on the left
side of the copier/printer, as illustrated in Figure 2.
Paper Tray 5 can accommodate transparencies
and other specified paper stocks, and various
paper sizes up to 12 x 18 inches or SRA3 (320 x
450 mm).
Refer to the Recommended Materials List and the
Color Materials Usage Guide for more information
about the materials you can use in Paper Tray 5.
CAUTION:Do not, at any time, place any objects
or materials other than the appropriate stock on
Paper Tray 5. Copier/printer damage may occur.
KEY POINT: If making 2-sided copies using Tray
5, remove any extra paper from the tray prior to
starting the 2-sided copy job. Ensure that extra
paper is removed from the tray prior to loading the
side 1 copies into the tray.
Figure 2: Paper Tray 5