Xerox 50 - Manual (Page 71)

DOCUMENT CENTRE CS 50 USER GUIDE 3–13 MAKING COPIES
1
2
4
5
6
7
3
13 Perform one of the following:
•
Raise the Duplex Automatic Document
Feeder (DADF) or Document Glass Cover
and place the document, face down, on the
Document Glass, as in Figure 20.
Ensure that the document lies against the reg-
istration area at the left rear corner of the
glass. The Registration area is identified with
an arrow.
Lower the Duplex Automatic Document
Feeder (DADF) or Document Glass Cover.
•
If you are using a Duplex Automatic
Document Feeder, place the document face
up into the DADF Tray, as in Figure 21. The
Document Feed Lamp lights when the
document is in the correct position. Ensure
that the paper guide is against the original
document.
14 Press the Start button.
15 When copying is completed, perform the
following:
•
Remove the copies from the Output Tray,
Sorter/Mailbox or Finisher/Mailbox on the right
side of the copier/printer.
•
Remove the original document(s) from the
Document Glass or Original Catch Tray of the
DADF.
•
If you used Paper Tray 5, remove the copy
stock from Tray 5 and store it properly.
Figure 20: Placing a document on the
Document Glass
Figure 21: Placing a document in the
DADF Feeder Tray
Document Feed Lamp