Xerox 50 - Manual (Page 192)

PAPER 9–6 DOCUMENT CENTRE CS 50 USER GUIDE
2
3
4
5
6
7
9
KEY POINT:
•
For the best results, use only the
recommended paper sizes, paper weights, or
paper types. If you do not use recommended
papers, you may experience copy quality
problems, paper jams, or possible component
failures.
Refer to the Recommended Materials List and
the Color Materials Usage Guide for more
information.
•
If you are loading pre-drilled paper, load it into
Paper Tray 5 with the undrilled long edge as
the leading edge (holes to the left).
•
Do not load the paper above the MAX fill line
marked on the paper tray edge guides.
•
If paper feeding or copy curl problems occur,
flip the paper over in the tray and make the
copies again. If the performance improves,
continue to load the paper in this manner.
Testing has shown that paper handling and
copy performance vary with room
temperature, humidity, paper quality, image
area on copies, etc. All of these variables
interact and, in some cases, you must decide
which paper loading method works best.