Xerox 50 - Manual (Page 122)

ADDED FEATURES 5–26 DOCUMENT CENTRE CS 50 USER GUIDE
2
3
4
5
6
7
5
No Erase
The Edge Erase default setting is No Erase.
When the No Erase button is selected, output will
reflect the factory default edge erase of 2 mm or
the default edge erase set by your System
Administrator.
A 2mm edge erase is normally sufficient to
remove shadows from the copy edges.
1 Touch the Edge Erase button on the Added
Features tab to display the Edge Erase screen.
2 Touch the No Erase button, as illustrated in
Figure 28.
3 Touch the button next to the icon that most closely
resembles the Original Orientation for the
document on the Document Glass.
4 Touch Save to return to the Added Features tab.
Figure 28: No Erase option on the
Edge Erase screen