Xerox 50 - Manual (Page 172)

OUTPUT FORMATS 7–18 DOCUMENT CENTRE CS 50 USER GUIDE
2
3
4
5
6
7 7
Invert Image
The Invert Image feature (Figure 25) allows you to
create a mirror image, negative image, or negative
mirror image.
NOTE: To apply an Invert Image feature to a
document, you must use the Document Glass
when making your copies. The Invert Image
feature does not work when original documents
are fed through the Duplex Automatic Document
Feeder.
Mirror image
When the Mirror Image feature is selected, the
output copy of the entire document area appears
as a mirror image reflection of the document that
was placed on the Document Glass. Figure 26
provides an illustration of a mirror image.
KEY POINT:
•
Mirror Image applies to the entire document.
Specific areas of the document cannot be
selected.
•
The Margin Shift feature can not be used with
the Invert Image feature.
Figure 25: Invert Image feature
Figure 26: Example of a mirror image