Xerox 50 - Manual (Page 78)

BASIC COPYING 4–6 DOCUMENT CENTRE CS 50 USER GUIDE
2
3
4
5
6
7
4
Black
The Black option should be selected when the
desired output is a black and white copy. Black
and white copies can be made from any
document. When you select Black, the copier/
printer will use black dry ink (toner) only, as in
Figure 6.
With the Black option, the copier/printer produces
50 copies per minute when it uses 8.5 x 11 inch
(A4) paper that is fed long edge first.
Single Color
The Single Color option, accessed through the
More... button, changes the image and/or text on
a document to one color other than black (Figure
7). Single color copies, as illustrated in Figure 7,
can be made from any color or black and white
document. The Touch Screen directs you to select
one of six preset colors (Red, Green, Blue,
Yellow, Magenta, or Cyan). With the Single Color
option, the copier/printer produces fewer than 50
copies per minute when it uses 8.5 x 11 inch (A4)
paper that is fed long edge first.
NOTE: Using this option will not create a color
separation. Close examination will reveal that
multiple colors are used to create the output that
appears to be a “single” color.
Figure 6: Example of Black
Figure 7: Example of Single Color