Xerox 50 - Manual (Page 119)

DOCUMENT CENTRE CS 50 USER GUIDE 5–23 ADDED FEATURES
1
2
3
4
6
7
5
1 Touch the Margin Shift button on the Added
Features tab to display the Margin Shift screen, as
illustrated in Figure 25.
2 Touch either the Side 1 or Side 2 button to display
the Margin Shift screen for the desired side.
3 Touch the Variable Shift button to display the
Variable Shift detail screen, as illustrated in
Figure 26.
4 Perform one or both of the following:
•
Under the Left & Right icon, touch the right
arrow to shift the image toward the right edge.
Touch the left arrow to shift the image toward
the left edge. Continue to touch the
appropriate arrow until you have specified the
desired amount of shift from 0 to 432 mm.
•
Under the Up & Down icon, touch the up
arrow to shift the image toward the top edge.
Touch the down arrow to shift the image
toward the bottom edge. Continue to touch
the appropriate arrow until you have specified
the desired amount of shift from 0 to 432 mm.
Notice that the values in the box increase or
decrease according to your selection and that the
icon illustrates the direction of the shift.
Figure 25: Margin Shift screen
Figure 26: Margin Shift screen with
Variable Shift selected