Xerox 50 - Manual (Page 77)

DOCUMENT CENTRE CS 50 USER GUIDE 4–5 BASIC COPYING
1
2
3
5
6
7
4
Full Color
The Full Color option combines all four dry ink
colors (black, cyan, magenta, and yellow). You
should select the Full Color option when the
document contains color and black, as in Figure 4.
In Full Color mode, output is produced at
approximately 12 copies/prints per minute.
3 Pass Color
The 3 Pass Color option combines the three
colors of dry inks (cyan, magenta, and yellow), as
illustrated in Figure 5. You should select the 3
Pass Color option when the document contains
very little black, or when Process Black is
acceptable over a true reproduction black, such as
is used with photographs.
NOTE: Process Black is a combination of Cyan,
Magenta and Yellow. For example, in Figure 5,
the three dry inks are combined together in equal
amounts to produce black. No Black ink is used.
Figure 4: Example of Full Color
Figure 5: Example of 3 Pass Color