Xerox 50 - Manual (Page 61)

DOCUMENT CENTRE CS 50 USER GUIDE 3–3 MAKING COPIES
1
2
4
5
6
7
3
Loading Paper
Paper Trays 1, 2, 3, or 4
1 Pull out the paper tray.
2 Place the appropriate paper into the tray, as
illustrated in Figure 2. Adjust the paper guides.
You can not adjust the guides for Tray 1. Contact a
Xerox Service Representative to adjust the paper
guides for Tray 1.
The paper level must not be above the MAX fill
line, as indicated in the tray.
3 Close the paper tray slowly to avoid skewing the
paper stack. Ensure that the paper tray is fully
closed.
Refer to chapter 9, “Paper,” for more detailed
information.
KEY POINT: For best results, use only the paper
sizes and paper weights indicated in chapter 9
and be sure that the paper guides of the tray are
adjusted to the correct paper size.
Figure 2: Loading a Paper Tray