Ricoh 170 / 180 - Manual (Page 95)

AI Short Protocol (Type I Only)
This feature employs Artificial Intelligence (AI) to learn the communication
characteristics of the machines programmed as Speed Dial or Quick Dials. AI
Short Protocol helps you to reduce communication costs between machines
produced by the same manufacturer. AI short Protocol works if you dial using the
Quick Dial, Speed Dial or Redial Keys. The machine at the other end must have
the AI Short Protocol Feature.
When you send a fax message, the two machines carry out a handshaking
procedure, during which they establish the best way to communicate with each
other. Using AI short Protocol, this handshaking procedure only takes place in full
the first time you dial a particular number. Your machine remembers the optimum
communication parameters for calling that number. The next time you dial that
number, the machine will remember these parameters and the preliminary
handshaking will be significantly reduced, saving communication costs.
Copying
If you need to make a copy of something, and there is no copier available, use
your fax machine.
Copying an original is a good way to test contrast and resolution before
sending a document, if you are not sure that the settings that you have
chosen are appropriate. The copy made by your printer shows you how the
message would look when received at the other end. If it does not look good,
change the settings and try again.
1. Carefully place your original into the
document feeder.
TRANSMIT OPTIONk
DIAL FAX NUMBER
2. Type I: Press the Start key.
Type II: Press the Copy key.
COPY MODE 1 SETS
3. If you wish, change the number of cop-
ies using the ten keypad.
COPY MODE 2 SETS
4. Press the Start key. COPYING
P01. 01/01 SET
OTHER
84