Ricoh 170 / 180 - Manual (Page 34)

Out Line or Extension Telephone System?
You can select an extension line or out line using the PABX Access System.
Out line: You get an outside line without doing anything.
Inside line: You get an outside line by dialing the access number before the
telephone numbers.
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
SETTING? Y/j
PRINT LIST j
2. Press the Yes key. Press the
j
key
once or press the
k
key until the set-
tings for Switch 13 are displayed.
KPAD/Y/j k
SWITCH 13:0000 0000
3. Change the settings of digit 0. KPAD/Y/j k
SWITCH 13:0000 0000
4. If you wish to change the setting, press
0 using the ten keypad.
5. Press the Yes key, then press the Func-
tion key.
NOTE: With On-hook Dial or when using the handset this feature has no effect.
Setting The Access Number
If you select inside line, you have to program the number which preceeds the
telephone number.
1. Press the Function key and
6,2,2,2,2,6,1 using the ten keypad, then
press the Yes key.
Y/NEXT k
SET POLLING ID
2. Press the
k
key until the display is as
shown opposite.
Y/NEXTk
SET PSTN ACCESS NO.
3. Press the Yes key. NUMBER KPAD
ll
4. Enter the access number.
Example: 0, press 0 using the ten key-
pad
NUMBER KPAD/N
0l
5. Press the Yes key to store your setting,
then press the Function key to finish.
Digit 0
0: Outline
1: Inside line
INS
T
A
LL
TING THE
M
A
CHINE
SOME ITEMS MUST BE PROGRAMMED FIRST
23