Installing the machine, Location, Installation – Ricoh 170 / 180 User Manual
Page 24
INSTALLING THE MACHINE
LOCATION
For the best possible performance, install your machine in a place which satisfies
the following conditions.
❐
Not exposed to direct sunlight
❐
Well ventilated (air turnover at least three times per
hour).
❐
Level
❐
Not subject to vibration
❐
Away from other electronic equipment, to avoid
interference
❐
Away from areas containing corrosive gas.
❐
Dust-free
❐
Condensation-free
❐
Temperature 17 to 28°C[63 to 82 °F]
❐
Humidity 40 to 70%RH (do not install near a
humidifier)
❐
Away from heaters and air conditioners, to avoid
sudden changes of temperature
❐
Within 2m (2.2 yards) of a three-pin grounded power outlet
❐
With the clearance as shown on the right
NOTE: If you wish to receive legal size messages or copy the legal size docu-
ments, you must allow 8" (20cm) clearance at the back of the machine.
INSTALLATION
CAUTION:Do not plug it in until everything is connected properly.
When moving the machine, first disconnect the telephone line, then the power
cord.
NOTE : Before doing the installation procedure, check the contents of the box . In
some models, some of the accessories have already been installed.
❐
Fax Machine
❐
Paper Roll
❐
Document Table
❐
Copy tray
❐
Operation Manual
❐
Handset
❐
Telephone Cord
❐
Quick Dial Sheet
❐
Modular Cord
❐
Paper Guide
❐
Paper Holder Rod
INS
T
A
LL
ING
THE
M
A
CHINE
8" (20cm)
4" (10cm)
4" (10cm)
13