Ricoh 170 / 180 - Manual (Page 42)

8. When you have entered the new label:
Press the Yes key. If the display is not
as opposite, press the Yes key again.
N ll KPAD/j /k
PRINT LISTj/SEARCH k
9. Either:
❐ Edit another: Go to step 2.
❐ Print a list of Speed Dial Numbers: Press the
j
key.
❐ Finish : Press the Function key.
Erasing a Speed Dial
1. Press the Function key and 3,2 using
the ten keypad, then press the Yes key.
N ll Y/j k
PRINT LIST j/SEARCH j
❐
At this time, you can print a Speed Dial List if you
press the
j
key, then press the Start key.
2. Input the Speed Dial Code that you
wish to erase. Example: Speed Dial 01
N 01 CHANGE? Y/j k
ATLANTA BRANCCH
❐
If the wrong number is displayed, use the j and k
keys to scroll through the Speed Dial keys on the
screen.
3.Press the Yes key . N 01 KPAD/Y/N
226231047lllllllll
4. Erase the number: Press the No key
and then press the Yes key.
N ll Y/j k
PRINT LIST j/SEARCH k
5 Either:
❐ Program another: Go to step 2.
❐ Print a list of Speed Dial Numbers: Press the
j
key.
❐ Finish : Press the Function key.
Programming Groups (Type I Only)
Groups allow you to combine some numbers into one group, for easy sequential
transmission to all the numbers in that group. These numbers can be selected
from those already stored in Quick Dial keys or Speed Dial codes, or you can
select other numbers by entering them using the ten keypad.
You can also store a label with each group. This label will be displayed when you
select the Group.
NOTE: Up to 10 numbers can be stored in a group.
Programming a Group
1. Press the Function Key and 3,3 using
the ten keypad, then press the Yes key.
GROUPl 1-3/j k
PRINT LIST j/SEARCH k
❐
At this time, you can print a Group Dial List, if you
press the
j key, then press the Start key.
2. Enter the group number using the ten
key pad, then press the Yes key.
GROUP 1 Y/N
PROGRAM QUICK?
❐
There are 3 groups, from 1 to 3.
INS
T
A
LL
TING THE
M
A
CHINE
STORING OFTEN USED NUMBERS
31