Ricoh 170 / 180 - Manual (Page 89)

2. Press the Start key.
❐
Your fax message is held on polling standby.
NOTE: If you have not yet stored an ID Code using Function 61, you will be
asked to enter an ID Code. Proceed in the same way as for step 4 in "Stored
ID Override" below.
Stored ID Override
This procedure will override the ID Code stored in your machine. The override is
only effective for this one transmission.
1. Follow both steps in any order:
❐ Place your document in the feeder. TRANSMIT OPTIONk
DIAL FAX NUMBER
❐ Press the Function key and 1,2 us-
ing the ten keypad, then press the
Yes key. POLLING TRANS OPTk
SET DOCUMENT
2. Press the
k
key until "
SET POLLING
ID?
" is displayed, then press the Yes
key.
SET OPTION KPAD
ID:llll
3. Enter the ID code that you wish to use
for this message. Example: 0824. Press
0,8,2,4 using the ten keypad.
SET OPTION Y/N
ID:0824
4. Press the Yes key. POLLING TRANS OPT k
PUSH START
5. Press the Start key.
❐
Your fax message is held on polling
standby.
Printing the Contents of Stored Polling Messages (Type I Only)
1. Press the Function key and 5,2 using
ten keypad, then press the Yes key.
FILE NO.lll KPAD/j k
PRINT LIST j /SEARCH k
❐
To print list of files press the
j
key, then press the
Start key.
2. Either: FILE NO.004 START/N
CHICAGO OFFICE
❐ Scroll through the files on the dis-
play: Press the
k
key until the re-
quired file appears. Then press the
Yes key.
❐ If you know the file number, input it
directly: Enter the file number, then
press the Yes key.
3. Press the Start key.
See page 79 for options that are
available with Polling Transmission.
OTHER
78