Ricoh 170 / 180 - Manual (Page 130)

Quick Reference Card
Basic Transmission Procedure [Type I Model]
Memory Transmission Immediate Transmission
1 Make sure that the machine is in standby mode.
2
Check that the Memory indicator is
lit.
If it is not lit, press the Line Select
key. Check that the Memory indicator is
not Lit.
If it is lit, press the Line Select key.
3 Carefully place the document in the feeder.
4 Select the resolution (and halftone if necessary)
5
You may select one or more of the
following options. To select an
option, press the right arrow on the
scroll key, then press one of the
following combinations of keys.
Send Later
Page Count
TTI On/ Off
6
Enter the telephone number in one of the following ways
Quick Dial
Speed Dial
Group Dial
Ten Key Pad
Handset
On Hook Dial
Quick Dial
Speed Dial
Ten Key Pad
Handset
On Hook Dial
7 Press the YES key. Press the START key.
8
Either:Dial another number go to
step 6. then Press the Start key.
To dial another number, go to step
6. Otherwise, press the Start key.
9
The machine stores your message
in memory, then sends it to each
terminal in sequence. The machine dials, then your
message is fed, scanned, and
sent to the other terminal.