Errata, P13] accessories, P14] installation procedure – Ricoh 170 / 180 User Manual
Page 142: P85, 86, 87 and 104
ERRATA
[P13] Accessories
One paper holder rod is also packed with the machine.
[P14] Installation Procedure
2-3) Set the paper guides [E] at each end to match
the paper size. The paper roll must be set in
the center.
2-4) Insert the rod into the paper roll as shown,
then set the roll into the machine (hold the roll
in a direction so that it rolls away from you
when the leading edge is pulled upward).
NOTE: Make sure the ends of the rod fit into
the paper guides
[P15]
Cut off excess paper after plugging in the power cord. Disregard step 2-7 and
insert the following after step 3-3:
3-4) Press the start key to cut off the excess paper.
[P85, 86, 87 and 104]
Replace " Memory Storage Report" and "Polling Reserve Report" with "File
Reserve Report ".
This report is printed after storage for memory transmission and/or polling
reception.
Replace "Polling Result Report" with "Communication Result Report ". This report
is printed after memory transmission and/or polling reception .
Part No. H0688690
[E]