Document type – Ricoh 170 / 180 User Manual
Page 118
DOCUMENT TYPE
Before you send your document, make sure that it meets the following
requirements.
Caution : Documents that do not meet these requirements can cause your
machine to jam or may cause some components of the machine to become
damaged or dirty.
Correct Size for the Document Feeder
❐
Thickness: 2 to 8 mils (0.05 to 0.15 mm) (20 lb paper/80gm
2
paper)
❐
Length and Width: See the above diagram.
❐
If the page is too short, put it inside a document carrier or enlarge it with a
copier
❐
If the paper is too long, divide it into two or more sheets.
Clearly Written
❐
Small faint characters may not be transmitted clearly.
Uniform Page Sizes
❐
Do not use different sizes of document in the same transmission.
Dry Ink
❐
All ink must be dry before you place the document in the feeder.
105mm
(4.1")
148mm
(5.8")
Minimum
600mm
(23.6")
4mm
(0.16")
The part shaded will
not be scanned.
210mm(8.2")
Maximum
5mm
(0.2")
257mm(10.1")
T
E
C
H
N
IC
A
L
R
E
F
E
R
E
N
C
E
107