Ricoh 170 / 180 - Manual (Page 84)

8. Either:
❐ Store this RTI as a Wild Card: Press the Yes key.
❐ Otherwise: Press the No key
9. Either:
❐ Input another RTI/CSI: Go to step 5.
❐ Input another forwarding station number: Press the No key. Go to step 3.
❐ Finish: Press the Function key.
Switching Forwarding On/Off
Before you use Forwarding, you have to switch it on using Function 62. After you
switch Forwarding on, "
FORWARD
" is displayed when the machine is in standby
mode.
1. Press the Function key and
6,2,2,2,2,6,2 using the ten keypad. Then
press the Yes key.
Y/NEXT k
SELECT LINE
2. Press the
k
key until "
FORWARDING
ON/OFF
" is displayed.
Y/NEXT k
FORWARDING ON/OFF
3. Press the Yes key. FORWARDING Y/j k
ON kOFF
4. Use the
j
and the
k
keys to switch this
feature on or off.
FORWARDING Y/j k
kON OFF
5. Press the Yes key to store your setting,
then press the Function key.
FOWARD 100% 9:02 AM
SET DOC. OR DIAL NO.
Selecting Which Message to Forward
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad. then
press the Yes key.
SETTING? Y/j k
PRINT LIST j
2. Press the Yes key, then press the
j
and
the
k
keys until the settings for Switch
08 are displayed.
KPAD/Y/j/k
SWITCH 08: 0000:0000
3.First, change the setting of digit 7. If you
to change digit 7, press 7 using the ten
keypad .
KPAD/Y/j k
SWITCH 08: 1100 0000
4. Finish: Press the Yes key, then press
the Function key.
Digit 7
0: Only forward messages from Specified
Senders.
1: Forward all message except for those from
Specified Senders
AD
V
A
NCED
FEA
T
UR
E
S
RECEPTION
73