Ricoh 170 / 180 - Manual (Page 139)

2. Press the Yes key, then press the
ja
and
the
k
key until the setting for Switch 07
is shown.
KPAD/Y/j k
SWITCH 07: 0000 0000
3. Change the setting of digit 1. If you wish
to change the settings press 1 using the
ten keypad.
KPAD/Y/j k
SWITCH 07: 1000 0000
4. To finish: Press the Yes key, then press the Function key.
2. P89
TELEPHONE ANSWERI NG MACHI NE
The Type I model has a useful internal Telephone Answering machine. You can
access it by setting up your machine to TAM mode. You do not need to connect
an extra telelphone. This machine can record messages of up to about 6 minutes
in all.
Keys
Listening to the received voice messages
1. Make sure that the machine is in TAM mode.
2. Press the No key, now you are in TAM
standby mode.
01 MESSAGE(S) EXIT/i
ERASE-C >/>>-k
3. Either:
❐ The number is displayed on the
first line, you received messages:
Go to step 4.
❐ "00 message(s)" is not displayed,
you have not received any mes-
sage: Go to step 5.
4. Press the
k
key. The machine will start
playing back from the first message, and
the date and time of receiving will be dis-
played.
NO.01: MAR. 25 11:35AM
<<-j L-i >/>>-k
NOTE: ❐ If you wish to stop playing, press the No key.
❐ If you wish to skip a message, press the
k
key.
❐ If you wish to skip back a message, press the
j
key.