Ricoh 170 / 180 - Manual (Page 94)

RDS (Remote Diagnostic System)
Overview
If your machine has a problem, a service technician can perform various
diagnostic tasks over the telephone line from the service station to try to find out
what is wrong with your machine. The service technician can also use RDS to
change some of your machine’s settings if you request it.
For RDS operations, it may be necessary to stay near the machine.
RDS is automatically switched off 24 hours after it has been switched on.
Switching RDS On/ Off
Use this function when the service technician has changed the factory setting. If
you wish to switch RDS back on, you must switch it on yourself using the
following procedure.
1. Press the Function key and
6,2,2,2,2,6,2 using the ten keypad. Then
press the Yes key.
Y/NEXT k
SELECT LINE
2. Press the
j
key until "
RDS ON/OFF
"
is displayed.
Y/NEXT k
RDS ON/OFF
3. Press the Yes key. RDS Y/j k
ON kOFF
4. Use the
j
and the
k
keys to switch this
feature on or off.
RDS Y/j k
kON OFF
5. Press the Yes key to store your setting,
then press the Function key.
AD
V
A
NCED
FEA
T
UR
E
S
OTHER
83