Ricoh 170 / 180 - Manual (Page 115)

Digit Purpose
3 TSI Printing 0: Off* 1: On
4 to 7 Do not change these settings.
Digit 03 - Automatic printing of reports
Digit Purpose
0 Communication Result Report (Type I Only) 0: Off * (ASIA) 1: On * (USA)
1 Do not change this setting.
2
File Reserve Report (Memory Transmission)
(Type I Only)
0: Off * 1: On
3 File Reserve Report ( Polling Reception) 0: Off * 1: On
4
Communication Result Report (Polling Reception)
0: Off 1: On*
5
Transmission result report (Immediate Transmission)
0: Off* (ASIA) 1: On * (USA)
6 Polling Clear Report (Type I Only) 0: Off * 1: On
7 TCR 0: Off 1: On*
Switch 04 - Automatic printing of reports
Digit Purpose
0 to 6 Do not change these settings.
7
Inclusion of part of the image on the following reports : Transmission
result report,Communication failure report (Type I Only)
0: Off 1: On *
Switch 05 - Options for reception
Digit Purpose
0 Substitute reception (Type I Only) 0: Off 1: On *
1 Memory reception if no RTI or CSI received. 0:Enable 1: Disable*
2 to 7 Do not change these settings.
Switch 06 - Home position settings
Digit Purpose
0 TTI Printing 0: Off 1: On *
1 Do not change these setting.
2 Closed Network Transmission 0: Off * 1: On
3 to 7 Do not change this setting.
Switch 07- One Touch Change Over
Digit Purpose
0 to 4 Do not change this settings.
5 One Touch Change Over 0: Off 1: On *
6 to 7 Do not change this settings.
ON/ OFF SWITCHES AND USER PARAMETERS
104