Ricoh 170 / 180 - Manual (Page 28)

Setting the Date and Time
Your fax machine has an internal clock. It controls the following features:
❐ The time display on the operation panel while the machine is idle.
❐ Operation of time-delay features like Send Later.
❐ The date and time that is printed out at the other end on pages received from
your machine. Program the correct date and time when you install the machine.
❐ In areas where the supply is 220 Vac, the order of steps is a little bit different
from the following. You must change the date first, then the month and year.
1. Press the Function key and
6,2,2,2,2,8,1 using the ten keypad. Then
press the Yes key.
Example: Change to August 24, 1995 at
2: 30PM.
SUN KPAD/Y
JAN 01 1994 10:00AM
2. Adjust the month. SUN KPAD/Y
AUG 01 1994 10:00AM
❐ Press the # key to advance a
month.
❐ Press the
\
key to go back a
month.
❐ Press the
k
key to move the cursor
and accept the setting.
❐
3. Type in the date, year and time using
the keypad.
NOTE: The day of the week will be set
automatically.
Example : Press 2,4,9,5,1,1,3,0,# using
the ten keypad
THU KPAD/Y
AUG 24 1995 11:30PM
4. When the display is correct, press the Yes key, then press the Function key
to finish.
Cross- references:
Send Later: see page 45
The times in this manual are shown AM/PM Format. This format is used in models
where the supply is 115 Vac. In other areas, the 24-hour clock format is used. 24
hour equivalents are listed below.
00 Midnight (12am) 06 6 am 12 Noon (12 pm) 18 6 pm
01 1 am 07 7 am 13 1 pm 19 7 pm
02 2 am 08 8 am 14 2 pm 20 8 pm
03 3 am 09 9 am 15 3 pm 21 9 pm
04 4 am 10 10 am 16 4 pm 22 10 pm
05 5 am 11 11 am 17 5 pm 23 11 pm
Press ing the# key changes between AM and PM
INS
T
A
LL
TING THE
M
A
CHINE
SOME ITEMS MUST BE PROGRAMMED FIRST
17