Ricoh 170 / 180 - Manual (Page 16)

MANUAL CONVENTIONS
Key Names
On the operation panel, there are four buttons (
i m j k
).They
show the directions up, down, left and right. These are the scroll
keys. They are often used in the operating procedures to gain
access to various features. For example, if you see "Press the
k
key" in the manual, you are being asked to press the right-pointing
arrow of the scroll button. On this machine, the
i
key also acts as
the No key, the
m
key is used as the Yes key.
Displays
Messages seen on the display are shown in a larger box, usually on the right
hand side of the page, directly opposite the step that brought it up on the display.
After following a step in a procedure, check the display to see if it corresponds to
the one in the manual. This may help you to check whether you are following the
procedure correctly. The following examples show three common types of display.
Example A: The keys that can be
pressed are shown in the top right. In
this example, you can press the Yes or
Start key. TRANSMIT Y/START
471-319266
Example B: The choices of settings for a
feature are shown on the screen. The
current setting is TT . If you press the
k
key, the setting will be changed to PD.
SELECT LINE Y/j/k
kTT PD
Example C: The
ABC
in the right corner
of the display indicates that you can in-
put letters using the Quick Dial keys,
and numbers using the ten keypad on
the operation panel.
RTI ABC
INTRO
DU
CTIO
N
5