Ricoh 170 / 180 - Manual (Page 44)

2. Enter the group station number which
you wish to edit using the ten key pad,
then press the Yes key.
GROUP 1 Y/N
PROGRAM QUICK?
3. Either: GROUP 1 Y/N
n 04
❐ Change the Quick Dial key where
the group is stored: Press the Yes
key. Then press the new Quick
Dial key. Press the Yes key to ac-
cept.
❐ Keep the same the Quick Dial key:
Press the No key.
4. Either: GROUP 1 Y/N
PROGRAM LABEL?
❐ Change the Group label: Press the
Yes key. Edit the label using the
Quick Dial keys, then press the
Yes key to accept the new label.
❐ Keep the same label: Press the No
key.
5. Either:
❐ Add a new number to the group: Enter it using the ten keypad, then press
the Yes key.
❐ Erase a number from this group: Enter it using the ten keypad then press
the Yes key again to confirm the deletion.
❐ Finish: Press the Yes key.
Erasing Group Dials
1. Press the Function Key and 3,3 using
the ten keypad, then press the Yes key.
GROUPl 1-3/j k
PRINT LIST j/SEARCH k
❐
At this time, you can print a group dial list by press-
ing the
j key then press the Start key.
2. Enter the group station number which
you wish to edit using the ten key pad,
then press the Yes key.
GROUP 1 Y/N
PROGRAM QUICK?
❐
There are 3 groups, from 01 to 03.
3. Press the No key. GROUP 1 QUICK/N
PROGRAM LABEL?
4. Press the No key. GROUP 1 Y/N
CLEAR?
5. Press the Yes key. GROUP 1 Y/N
CLEARED
6. Either:
❐ Erase the another number:go to step 2.
❐ Finish: press the Function key.
INS
T
A
LL
TING THE
M
A
CHINE
STORING OFTEN USED NUMBERS
33