NEC PD754144 User Manual
NEC Hardware
This manual is related to the following products:
Table of contents
Document Outline
- COVER
- Major Revisions in This Edition
- INTRODUCTION
- CHAPTER 1 GENERAL
- CHAPTER 2 PIN FUNCTIONS
- CHAPTER 3 FEATURES OF ARCHITECTURE AND MEMORY MAP
- CHAPTER 4 INTERNAL CPU FUNCTION
- CHAPTER 5 EEPROM
- CHAPTER 6 PERIPHERAL HARDWARE FUNCTION
- CHAPTER 7 INTERRUPT AND TEST FUNCTIONS
- 7.1 Configuration of Interrupt Controller
- 7.2 Types of Interrupt Sources and Vector Table
- 7.3 Hardware Controlling Interrupt Function
- 7.4 Interrupt Sequence
- 7.5 Nesting Control of Interrupts
- 7.6 Servicing of Interrupts Sharing Vector Address
- 7.7 Machine Cycles Until Interrupt Servicing
- 7.8 Effective Usage of Interrupts
- 7.9 Application of Interrupt
- 7.10 Test Function
- CHAPTER 8 STANDBY FUNCTION
- CHAPTER 9 RESET FUNCTION
- CHAPTER 10 MASK OPTIONS
- CHAPTER 11 INSTRUCTION SET
- 11.1 Unique Instructions
- 11.2 Instruction Set and Operation
- 11.3 Opcode of Each Instruction
- 11.4 Instruction Function and Application
- 11.4.1 Transfer instructions
- 11.4.2 Table reference instructions
- 11.4.3 Bit transfer instructions
- 11.4.4 Operation instructions
- 11.4.5 Accumulator manipulation instructions
- 11.4.6 Increment/decrement instructions
- 11.4.7 Compare instructions
- 11.4.8 Carry flag manipulation instructions
- 11.4.9 Memory bit manipulation instructions
- 11.4.10 Branch instructions
- 11.4.11 Subroutine/stack control instructions
- 11.4.12 Interrupt control instructions
- 11.4.13 Input/output instructions
- 11.4.14 CPU control instruction
- 11.4.15 Special instructions
- APPENDIX A DEVELOPMENT TOOLS
- APPENDIX B ORDERING MASK ROM
- APPENDIX C INSTRUCTION INDEX
- APPENDIX D HARDWARE INDEX
- APPENDIX E REVISION HISTORY