Skt fmem.bit skt pmem.@l skt @h+mem.bit, Skf mem.bit, Skf fmem.bit skf pmem.@l skf @h+mem.bit – NEC PD754144 User Manual
Page 277: Sktclr fmem.bit sktclr pmem.@l sktclr @h+mem.bit
CHAPTER 11 INSTRUCTION SET
277
User’s Manual U10676EJ3V0UM
SKT fmem.bit
SKT pmem.@L
SKT @H+mem.bit
Function: Skip if (bit specified by operand) = 1
Skips the next instruction if the bit of the data memory addressed in the bit manipulation addressing mode (fmem.bit,
pmem.@L, or @H+mem.bit) is 1.
SKF mem.bit
Function: Skip if (mem.bit) = 0
mem = D
7-0
: 00H to FFH, bit = B
1-0
: 0-3
Skips the next instruction if the bit specified by 2-bit immediate data bit at the address specified by 8-bit immediate
data mem is 0.
SKF fmem.bit
SKF pmem.@L
SKF @H+mem.bit
Function: Skip if (bit specified by operand) = 0
Skips the next instruction if the bit of the data memory addressed in the bit manipulation addressing mode (fmem.bit,
pmem.@L, or @H+mem.bit) is 0.
SKTCLR fmem.bit
SKTCLR pmem.@L
SKTCLR @H+mem.bit
Function: Skip if (bit specified by operand) = 1 then clear
Skips the next instruction if the bit of the data memory addressed in the bit manipulation addressing mode (fmem.bit,
pmem.@L, or @H+mem.bit) is 1, and clears the bit to “0”.