NEC PD754144 - Manual (Page 294)

APPENDIX A DEVELOPMENT TOOLS
294 User’s Manual U10676EJ3V0UM
EV-9500GS-20
EV-9501GS-20
Debugging Tools
In-circuit emulators (IE-75000-R and IE-75001-R) are available as the debugging tools for the
µPD754244.
The following table shows the system configuration of the in-circuit emulators.
Hardware
Order code
IBM PC/AT or compat-
ible machine
Refer to OS of IBM
PC.
~
Software
OS Supply medium
PC-9800 series MS-DOS 3.5"2HD µS5A13IE75X
Ver.3.30 5"2HD µS5A10IE75X
Ver.6.2 Note2
3.5" 2HC
µS7B13IE75X
5"2HC
µS7B10IE75X
Host machine
Notes 1. This is a maintenance part.
2. Although Ver.5.00 or above has a task swap function, this function cannot be used with this software.
Remark The operation of the IE control program is guaranteed only on the above host machines and OSs.
IE-75000-R Note1 The IE-75000-R is an in-circuit emulator that debugs the hardware and software of an
application system using the 75X Series or 75XL Series. To develop the µPD754244, use
this in-circuit emulator with an emulation board IE-75300-R-EM and emulation probe EP-
754144GS-R (both sold separately).
The in-circuit emulator is connected to a host machine for efficient debugging.
The IE-75000-R contains the emulation board IE-75000-R-EM.
IE-75001-R The IE-75001-R is an in-circuit emulator that debugs the hardware and software of an
application system using the 75X Series or 75XL Series. To develop the µPD754244, use
this in-circuit emulator with an emulation board IE-75300-R-EM and emulation probe EP-
754144GS-R (both sold separately).
The in-circuit emulator is connected to a host machine to provide efficient debugging.
IE-75300-R-EM This is an emulation board to evaluate an application system using the µPD754244. It is
used with the IE-75000-R or IE-75001-R.
EP-754144GS-R This is an emulation probe for the µPD754244GS.
It is connected to the IE-75000-R or IE-75001-R and IE-75300-R-EM.
Flexible board EV-9500GS-20 (for 20-pin plastic SSOP) and EV-9501GS-20 (for 20-pin
plastic SOP) facilitating connection with target board are supplied.
IE control program This program connects the IE-75000-R or IE-75001-R and a host machine with an RS-232C
or Centronics interface to control the IE-75000-R or IE-75001-R on the host machine.