Using the wan con figuration menu, Using the wan configuration menu, Using the wan con- figuration menu – Paradyne JetFusion Integrated Access Device User Manual

Page 71

2000-A2-GB20-10

- 52 -

February 2004

Using the
WAN Con-
figuration
Menu

Configuring the IAD for data involves several tasks. Tasks in this chapter
are described beginning at the WAN Configuration menu (which varies,
based on the WAN interface and datalink protocol).

Figure 4–3. WAN Configuration Menu

6300

LAN LINK

LAN ACT

WAN LINK

VOICE

POWER

JF2304
JF2308
JF2316

SDSL with Frame Relay

1. Set the datalink protocol to Frame Relay (page

)

2. Configure SDSL (page

)

3. Configure DLCIs (page

)

4. Configure Frame Relay options (page

)

5. Configure the voice path (page

127

)

SDSL with ATM

1. Set the datalink protocol to ATM (page

)

2. Configure SDSL (page

)

3. Configure PVCs (page

)

4. Configure ATM (page

)

5. Configure the voice path (page

127

)

LAN LINK

LAN ACT

WAN LINK

VOICE

POWER

JF2304

To configure the physical interface of the IADs, you may also
use the Quick Configuration command. For more information,
see Quick Configuration on page

LAN LINK

LAN ACT

WAN LINK

VOICE

POWER

JF2104
JF2104i
JF2108

G.SHDSL with ATM

1. Set the datalink protocol to ATM (page

)

2. Configure G.SHDSL (page

)

3. Configure PVCs (page